What is an FAA SFAR?
SFARs. A Special Federal Aviation Regulation (SFAR) pertaining to airspace is typically a temporary rule to address a temporary situation. It is generally not used to replace or enforce regulations that are to remain in effect for many years.
What SFAR 23?
23. placard adjacent to the airspeed indicator is an acceptable means of showing compliance with the requirements of FAR 23.1545(c). AIRPLANE FLIGHT MANUAL.
What is the SFAR 88?
SFAR 88 mandated a review of fuel tank system service history to reveal ignition sources in airplane fuel tanks due to unforeseen failure modes or factors not considered at the time of original certification of the airplane.
What is FAA Part 23 certification?
Specifically, the new part 23 revolutionizes standards for airplanes weighing 19,000 pounds or less and with 19 or fewer passenger seats by replacing prescriptive requirements with performance-based standards coupled with consensus-based compliance methods for specific designs and technologies.
What is the purpose of Obiggs?
The OBIGGS is a system composed of well-proven equipment generating directly Nitrogen on board to fully protect the aircraft tanks against explosion. Autonomous, it does not require any logistics.
What is the main reason to introduce SFAR 88?
Which vaccine is FAA approved?
Holders of FAA -issued Airman Medical Certificates or Medical Clearances may receive the Pfizer-BioNTech, Moderna, and/or Johnson & Johnson/Janssen COVID-19 vaccines; however, a 48-hour no fly/no safety related duty interval must be observed after each dose.
Is the Johnson and Johnson vaccine FAA approved?
WASHINGTON — Following the Emergency Use Authorization from the U.S. Food and Drug Administration (FDA) for Johnson & Johnson’s Janssen COVID-19 vaccine, the Federal Aviation Administration (FAA) has determined that pilots and others who perform safety sensitive duties may receive the vaccine under the conditions of …
What is Cdccl aviation?
What is CDCCL? According to EASA, CDCCL (Critical Design Configuration Control Limitation) are features of the fuel system design, which must be maintained, for the complete service life of the aircraft, to ensure that any unsafe condition does not develop. It’s an essential part of aviation safety.