How to reset router and modem?

Here’s how to reboot a separate modem/router:

  1. Locate your modem and router.
  2. Unplug both the modem and router.
  3. Leave both devices unplugged for at least 30 seconds.
  4. Plug the power back into your modem ONLY.
  5. Plug in the router and wait, at minimum, two full minutes.
  6. Test things out.

What 5ghz Wi-Fi channel should I use?

All of the 5 GHz channels offered support at least 20MHz channel width without overlap. When using 5 GHz, it is recommended to use at least 40 MHz channel width, as some client devices may not prefer 5 GHz unless it offers a greater channel width than 2.4 GHz.

How do I access my NOW TV router settings?

Open your web browser and enter “192.168. 0.1” in the address bar. Select Maintenance and enter “admin” and “nowtv” as the username and password. Select Wireless and then 2.4 GHz Wireless Settings.

How do I setup my NOW TV router?

It’s pretty easy.

  1. Plug your nowTV Hub Two in as usual (internet connected) and plug the router into your laptop/PC via ethernet.
  2. You should end up with a a client identifier like this: 12345ff3e500@nowtv|KvBz7ABc (this one is a made up example).

How do I reset my wifi settings?

How to reset network settings on an Android device

  1. Open the Settings app on your Android.
  2. Scroll to and tap either “General management” or “System,” depending on what device you have.
  3. Tap either “Reset” or “Reset options.”
  4. Tap the words “Reset network settings.”

What is username and password for nowtv router?

Once the NowTV Hub Router webpage opens and if you are asked to enter in your username and password then type admin & nowtv (all lower case).

How do I reset my NOW TV wifi?

Reset your device by going to your Settings menu

  1. Using your NOW remote, go to Settings, then select System.
  2. Select Advanced system settings, and then Factory reset.
  3. Enter the 4-digit code shown using the onscreen keypad.

How to connect PCCW modem to router?

You have to imput your PCCW log in and password to your router . 1. For Now TV : Socket –> PCCW Modem –> TV 2. For Internet net: Socket –> PCCW Modem –> WiFi router –> Computer Am i correct? Last edited by PKS_2000; 19-08-2011 at 01:21 PM . Hong Kong.

How to access the settings of a WiFi router?

How to Access Your Wi-Fi Router’s Settings. 1 Find Your Router’s IP Address. You log into your router’s firmware through a browser. Any browser will do. At the address field, type the IP address 2 Username and Password. 3 Change Router Settings. 4 Change Router Login. 5 Review Wi-Fi Password.

How do I connect my PCCW to my Now TV?

PCCW is a modem not a router , you plug your NOW TV to the PCCW modem , your router to PCCW modem and done You have to imput your PCCW log in and password to your router . Erm, not necessarily. Depending on which service the OP subscribes to, the PCCW model might very well have a wireless router built in already.

How do I contact the PCCW customer service?

Executive/Operator plan users should contact their PCCW account manager or onecommunications service hotline 1833111 for subscription) Fixed-mobile convergence enables your mobile number to be called simultaneously when an incoming call rings your desk phone.