Do mixer taps fit all baths?
No, not all taps will be a suitable fit for all baths. Typically, your bathroom fittings and fixtures will play a part in dictating which taps can accompany them, in addition to your own personal preference.
Are bath mixer taps standard width?
New taps are all made to standard dimensions, but check the hole distances of old baths, in case they are not compatible with mixer taps. Mixer tap holes for baths should be approximately 180mm. There will be some variation in the actual width between the pre cut holes from bath to bath but not much.
How do I remove a mixer tap from a bath?
Use an adjustable wrench and undo the tap connectors that hold the supply pipes to the tap tails. From above ensure the bath tap is supported to prevent it from turning. Underneath, loosen the nuts with the appropriate tool and the remove the tap.
Is it easy to change shower taps?
Even if you’re not very experienced with bath or plumbing projects, many of the steps necessary for replacing an old or damaged shower faucet are relatively simple.
Are mixer tap showers any good?
It’s a bath mixer tap, not a shower valve, they are always rubbish and not really any good for showering. Make sure your supplies are balanced too. If one supply is tank fed and one mains it will be no good.
What is a thermostatic bath mixer tap?
Thermostatic Bath Taps Having a thermostatic bath shower mixer allows you to select a pre-set water temperature, and the thermostatic control will keep the water at that constant temperature, even if someone flushes the toilet or turns on another tap.
Are mixer tap holes a standard size?
Standard taps and spouts generally require a hole of at least 22mm in diameter. Monobloc mixer taps, taking both a hot and cold supply, mostly require a minimum 32mm diameter hole.
What should I look for in a shower mixer?
Thermostatic mixer showers
- Requirements: Hot and cold water supply needed. Minimum 0.1 bar of water pressure.
- Recommendations: Use with an electric pump to increase water flow, if needed.
- Benefits: Avoids the risk of scalding, and the temperature is not affected by water use elsewhere in the home.
Can you run a shower from bath taps?
How to Connect Shower Heads to Bath Taps: It’s important to note that a mixer shower cannot be directly connected to your existing bath taps. In order to make this work, you will need a new shower mixer bath tap that can connect to the shower hose.
Can you change separate taps to mixer?
Hi, you can fit a mixer tap as you can buy a blanking plate for one of the existing tap holes. Two things to consider your new mixer will not be centre so may not look how you visioned. Also you need to look for a mixer tap with out a pop up waste as may not fit correctly, so a clicker waste would be more suitable.
What’s the difference between a monobloc tap and a mixer tap?
Bathroom basin mixer taps are very similar to a monobloc tap, but have separate controls for the hot and cold water. They come in both modern and classic designs, as well as two-hole and three-hole styles.
Are all bath mixer taps the same width?