How do you fix a DVD play that will not read disc?
Check if the disc is placed correctly and if the disc is in good condition. Make sure the disc isn’t put in upside down and also ensure the disc isn’t out of alignment in the loading tray. If a well- placed disc can’t be read by your DVD player, try playing it on another DVD player or a computer with DVD drive.
Why does my DVD says disc error?
The message DISC ERR is usually displayed when the unit ca see the disc but not play the disc. This usually occurs when the disc is scratched or dirty. The message NO DiSC is displayed when the unit simply can not read or detect the disc at all. This can also occur if the disc is scratched or dirty.
Why does my DVD say disc error?
Why is my DVD player saying no signal?
Change the INPUT or source the HDTV is set to by pressing the INPUT button on the TV or its original remote. When you try different inputs, let the DVD player play a disc and output a constant signal. 2. If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port.
How do I get my DVD player to play?
To connect your TV to your DVD player, plug the included cables (HDMI and/or composite cable) into both the player and the TV ports. Then, make sure the TV and DVD player are both plugged in and turn them on. Insert a DVD to test it out.
How do you reboot a DVD player?
Press the Home button on the Blu-ray Disc player remote. Once the menu is displayed, press the Left arrow button on the remote and navigate to the option Setup. On Setup, use the Down arrow button and go to Resetting and press the Enter button.
How do you fix a Sony TV when it says no signal?
Note: This message may appear after updating your Android TV™ software….The message No Signal is displayed on my TV screen after selecting an input
- Make sure the correct input is selected.
- Verify that the source device has power and is turned on.
- If the source device is connected with an HDMI® cable:
How do I reset my home theater DVD?
Follow this procedure to reset the DVD home theatre system to the factory default specifications.
- While the DVD player is in the stop mode, press the DVD SETUP button.
- Press the UP ARROW or DOWN ARROW to select SETUP .
- Press the ENTER button.
- Press the UP ARROW or DOWN ARROW to select RESET .
- Press the ENTER button.