How do I get my gateway to work?

How to connect your gateway to a router

1. Go to your gateway settings.
2. In the Broadband Link section, select Configure.
3. Select Disabled for the ATM PVC Search.
4. Confirm that the ATM Circuit Identifier values are:
5. In the Internet Connection Settings, set Connection Type to Direct IP.
6. Select Submit.

How do I configure my 2Wire modem?

Setting up in-home Wi-Fi on your 2Wire or Pace gateway

1. Make sure your 2Wire or Pace gateway and computer are connected by an Ethernet cable, and the connection is secure on both ends.
2. Click Wireless.
3. Choose or enter the following settings: Item/field. Setting. Enable Wireless Interface. Default: Enabled.
4. Click Save.

How do I configure my AT router?

From a device that is connected to the AT Wireless Internet network, open the web browser then go to http://attwirelessinternet. Enter the Login, then click LOGIN. 2. ACCESS MODEM SETTINGS: Click the Wi-Fi tab then click Edit under the desired Wi-Fi frequency band.

Do you have to use ATT gateway?

AT requires you to use their gateway for their fiber service. You can disable the router portion (pass through mode) and connect a much better router to it. There is also a way to use your own modem but AT will still charge you the monthly fee regardless of what you do once you signup for the service.

How do I fix my gateway problem?

Fixed: “Default gateway not available”

1. Method 1: Temporarily disable your antivirus software.
2. Method 2: Remove McAfee from your computer.
3. Method 3: Disable the auto-login feature.
4. Method 4: Reset TCP/IP with the Netsh command.
5. Method 5: Update your network adapter drivers.

What is 2 wire modem?

Your 2Wire gateway modem allows you to create a local network with all of your computers and devices, so that you can share a single Internet connection with all of your computers, and share your files, documents and photos. You can network through the 2Wire modem using either an Ethernet or wireless connection.

How do I change the password on my 2Wire modem?

How to set up an administrator password on my 2Wire 2701 modem

1. Open your web browser.
2. Type home or 192.168.
3. Click Settings.
4. Click Password.
5. Select Enable password protection.
6. Select Use default system password.
7. If you would like to use your own password, select Create or edit a custom password.

What is the default gateway for AT?

192.168.1.254
Enter http://192.168.1.254 to access the gateway settings screen.

What is the gateway for ATT Uverse?

The AT U-verse Residential Gateway (RG) is the central device in your home for receiving AT U-verse service. Your AT U-verse Residential Gateway (RG) will connect to: Your personal computers so you can use AT Yahoo! High-Speed Internet U- verse Enabled service.

Can I use my own modem with ATT Uverse?

You may wonder, can you use your own modem? You can use your own modem with AT internet, but AT would still charge their monthly fee.

What does it mean when your gateway is offline?

Potential Cause: Internet service to your customer’s house is temporarily out. The gateway has lost power. The gateway has been disconnected from your customer’s router or the physical port on the router or switch has failed. Your customer’s router is configured to block software Port 1883 or the iMist server is down.

How do I reset my network gateway?

Reset gateway

1. Press and hold the gateway Reset button for at least 10 seconds. If you let go before 10 seconds, the gateway will reboot, but it won’t reset.
2. Wait until the gateway restarts and all the status lights are lit.
3. See if the Broadband or Service status lights are solid green. If so, the reset worked.

How do I change my AT Gateway password?

Use Smart Home Manager to change Wi-Fi info

1. Sign in to Smart Home Manager.
2. Select My Wi-Fi.
3. Choose Edit next to the name or password.
4. Select X to clear existing info, then enter a new name or password.
5. Select Save.
6. Reconnect your devices with the updated network info.

How do I log into my AT gateway?

From a device that is connected to the AT Wireless Internet network, open the web browser then go to http://att.wirelessinternet. Enter the Admin Login, then click Login. Note: The default admin login is attadmin.

What is the IP address of my AT U verse router?

Enter http://192.168.1.254 into a browser URL bar.

How do I connect my device to the U-verse gateway?

Most devices are compatible with the U-verse gateway and do not require any additional steps besides connecting the devices together. If you are trying to connect your printer, you can find more here . Connect the Ethernet cable from the internet port on your router to a yellow Ethernet port on the AT gateway.

How secure is the 2Wire gateway?

Unlike a normal wireless router or gateway you might buy from a store, the 2Wire Gateway comes with Wi-Fi security already enabled for you. Your neighbors won’t be able to connect to or eavesdrop on your network via Wi-Fi. The gateway comes with Wi-Fi Protected Access (WPA or WPA2) PSK encryption enabled.

What devices are compatible with the U-verse gateway?

Most devices are compatible with the U-verse gateway and do not require any additional steps besides connecting the devices together. If you are trying to connect your printer, you can find more here .

How do I change the wireless settings on my 2Wire gateway?

You’d simply open your web browser and enter the gateway’s default IP address: 192.168.1.254. Then click Settings, LAN, and Wireless. See an example of the wireless settings below. Note: The model number of the 2Wire Gateway I used is i38HG; the control panel of other models or firmware versions might vary.