How do you drain a hot springs spa?

Place the pump inside the spa. If your pump’s outflow hose isn’t long enough to reach a drain, connect it to a garden hose. Turn the pump on and let the spa drain. When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose, and return it to storage.

How often drain Hot Springs hot tub?

every three to four months
Draining and refilling your spa will be an important aspect of spa ownership. Many spas need to be drained and refilled every three to four months due to chemical build-up.

How do I get all the water out of my hot tub?

The only way to remove every drop of water from your hot tub is using a wet and dry vacuum. You can then suck all the water out from every jet and the small residue left in the footwell by the submersible pump.

How do you drain a hot tub fast?

Drop one end of a long vacuum hose into the spa, and connect the other end to the wet/dry vacuum. Turn it on for a few seconds – just long enough to let the hose prime and get the flow moving. Turn off the vacuum, and quickly disconnect the hose so the water can flow out onto the ground.

How do you drain a spa tub?

How to Drain a Hot Tub Using the Drain Valve

  1. STEP 1: Locate and remove the valve cap.
  2. STEP 2: Identify the type of drain valve and connect a garden hose.
  3. STEP 3: Open the valve to drain the hot tub.
  4. STEP 1: Turn the power off and connect the pump.
  5. STEP 2: Run the hose to a suitable drainage location.

Is it cheaper to leave your hot tub on?

It’s much more economical to maintain your tub’s temperature rather than heating it from scratch each time. If you had to heat up your hot tub from cold each time you wanted to use it, this would have a dramatic impact on your hot tub running costs.

How often should spa water be changed?

every 3 to 4 months
We recommend customers to change their hot tub water every 3 to 4 months. The reason we recommend this is that as your continue to add more chlorine, it will start to dissolve slower and slower until the chlorine doesn’t dissolve in your hot tub anymore.

How long does it take to drain hot tub?

one to two hours
It should take one to two hours to drain the whole tub through the spigot. Depending on the contours of the tub, there will likely be some puddles of water left in the end.

Should hot tub jets always be on?

Since your hot tub pump circulates the warm water as well as the sanitizer, a general rule is to follow manufacturer recommendations or leave the pump on for a minimum of eight hours per day.

Do you leave a hot tub running all the time?

your hot tub is designed to be left switched on constantly and works best when it is left on all the time. Your hot tub is at it’s most efficient if left to run 24/7.

How does a spillover spa work?

Spillover spas are hot tubs that connect directly to your pool through a small curtain or fountain of water. This water moves directly from the jacuzzi into the swimming pool, spilling over a ledge or a series of ledges.

Why is spa draining in spa mode?

The suction valves need to be adjusted properly. Turn the spa suction valve to the “off” position and make sure you have the spa return valve at least partially open. This will help the flow between the pool and spa. You may also want to see if the actuator has gone bad if the suction valves are fine.

How do you drain a spa with two spigots?

Your spa model may have two spigots, a primary and auxiliary spigot. Use the primary spigot to drain most of the water, and then open the secondary spigot to drain the internal bleed lines. Attach the garden hose to the spigot, being careful not to cross-thread.

What chemicals do you put in a hot spring spa?

Wondering where to put your spa chemicals in your Hot Spring Spa? This video shows you where to add spa chemicals to your hot tub for routine water care maintenance. Popular spa chemicals include liquid chlorine, chlorine granules, or bromine.

Why choose Tri-X filters for your hot spring spa?

The Tri-X filters on your Hot Spring hot tub have twice the cleaning area of other filter cartridges the same size and help your spa water stay cleaner longer. Even the best hot tub filters require regular cleaning.

Do I need a cover lifter for my hot spring hot tub?

To get the most use from your Hot Spring hot tub, be sure to add a cover lifter designed to work with your spa design and marine vinyl cover. Download this quick reference how-to tip sheet and keep it with your monthly hot tub maintenance log or owner’s manual.