How do I override my brother toner life ending?

Press the ‘go’ button (or ‘start’ button) 5 times. The toner light should be off (the error may be flashing). The paper light should be on or flashing.

How do I completely reset my Brother printer?

Press the Up arrow key select Reset.

1. Press the Settings button.
2. Press All Settings.
3. Press Initial Setup.
4. Press Reset.
5. Press All Settings or Factory Reset (depends on which model you have).
6. Press Yes.
7. Press Yes again and hold for two seconds.

How to reset brother printer problems?

The only method to reset problem in the brother printers you do manual reset. The reset methode below can be applied for all models of Brother Printers. I not tried this method because I don’t have a Brother Printer to test this reset methods.

How do I fix error 46 on my Brother printer?

The Manual Reset Methods for Brother Printers Disconnect Brother Printer from power cord. Press Set button and while holding the Set button re-connect the printer to the power cord (electric source). It will display an error message “Machine Error 46” on the LCD

How do I reset the toner in Brother HL?

Cách reset này áp dụng cho các dòng máy in brother HL như: HL 2040/ 2130/ 2140/ 2240D/ 2250DN/ 2270DW. Nếu các dòng máy in này báo lỗi đèn toner ” Replace toner ” và không in được. Thì thực hiện cách reset lại toner như sau. B1: Mở nắp trước máy in brother ra. Sau đó tắt nguồn máy in bằng công tắt trên máy in.

How do I Reset my Brother mfc-6490cw?

was having issues with using these instructions for resetting my BROTHER MFC-6490CW and found this method worked perfect.. Hold down the menu key. While still holding the menu key, unplug the machine and plug it back in. Do not let go of the key until the machine reboots and the screen says “maintenence”.