How deep is a 30 bathroom vanity?
This vanity measures 30” wide and 18.5” deep. Cabinet hardware is included, with the faucet sold separately.
Do bathroom vanities come in different depths?
The standard depth of a vanity, from front to back, is typically between 20 to 21 inches. However, there are narrow depth options available which are usually 18 inches. While there isn’t necessarily a standard for vanity height, you will typically find them in the range of 32 to 36 inches tall.
What is the standard depth of a bathroom vanity?
21 inches
The standard vanity depth is 21 inches. But you can gain floor space in a small bath by trimming at least part of the vanity to 18, 15, or even 12 inches deep.
How shallow can a bathroom vanity be?
Standard bathroom vanities have a measurement of around 21-24 inches in depth. While a few inches might not seem like a big difference, in a bathroom, every inch counts. Shallow-depth vanities are those that measure between 17 and 20 inches deep.
How do I make my bathroom vanity deeper?
Use a combination of scrap wood blocks and furniture feet (also called cabinet feet) to raise the vanity 4 inches. Depending on the location of your bath vanity, you may need to use furniture feet on the backside.
How do you measure vanity depth?
If needed you can hold a piece of chalk on the edge of the door and swing it open to make a mark on the floor and then measure from that. Remember to leave and inch or 2 extra just to be sure you are not developing a pinch point between the vanity and a swinging door. Vanity depths generally range between 18-21 inches.
What is the average depth of a bathroom sink?
While you may find double bathroom sinks in various sizes, the standard size and shape is circular between 18-20 inches and about 8” deep. The distance between the two sinks, measured from each of their centers, should be at least 30 inches, if not more, depending on the total length of your vanity.
What size sink Can I put in a 30 inch cabinet?
A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide. The average 24″ sink base cabinet comfortably accommodates a standard 22″x30″ sink; be sure to consider the depth of your sink when planning storage inside the base cabinet.
How do you measure the depth of a bathroom sink?
Here’s how to measure for a basin
- Start with the width. Measure the distance from one side of the basin to the other.
- Next, measure the length. This is the distance from the rear of the basin to the front.
- Then, on the exterior of the basin, measure from the top to the bottom.
- Finally, measure the depth.
Can you use kitchen cabinets for bathrooms?
While you can use kitchen cabinets in the bathroom, you’d better be prepared for a lot of work. For example, you’ll need to remove any drawers in the kitchen cabinet to make room for under-sink plumbing. You’ll also need to take the kitchen cabinet apart so you can seal the wood.