How do I connect my HP LaserJet 4250 to network?

HP LaserJet 4250, 4300 and 4350 Series Printers – Connectivity

1. USB configuration.
2. Connect the USB cable.
3. 1 – Type B USB port (Location of the USB port)
4. 2 – Type B USB connector.
5. Network configuration.
6. Supported network protocols.
7. Configure the network product.
8. View or change network settings.

How do I connect my HP printer to the network?

Print with Wi-Fi Direct (Windows)

1. Make sure paper is loaded in the main tray, and then turn on the printer.
2. In Windows, search for and open Printers and scanners.
3. Click Add a printer or scanner.
4. Click Show Wi-Fi Direct printers.
5. Select the option starting with DIRECT followed by your printer model.
6. Click Add device.

How do I change the IP address on my HP Laserjet 4050?

At the printer turn the power off. Now press and hold the green button as you turn the printer back on, until you see cold reset appear in the menu. Release and wait for the printer to come to ready. Wait about 2 more minutes and then at the printer go to the information menu and print a config page.

How do I print a configuration page on HP LaserJet P1102w?

Print a Self Test/Device Configuration page through the control panel (HP LaserJet Pro M12w, P1102w, and P1109w printers)

1. Press and hold the Cancel button until the Ready light blinks.
2. Release the Cancel button . The Self Test/Device Configuration page prints. Figure : Self Test/Device Configuration page.

How do I find the IP address for my HP LaserJet P1102w?

Disconnect the USB cable from the printer. Be sure “Print Test Page” is selected, then press the “Finish” button. The Windows Printer Test Page will print the DHCP-assigned IP address of the printer.

How do I connect my HP LaserJet p1102w to wireless network?

Here are the steps:

1. Unplug the USB cable from the printer and computer if present.
2. Go to Control panel – Programs and feature – Select all the HP LaserJet printer entries and uninstall them.
3. Restart your computer.
4. When prompted, select the Connect through a wireless network option.

How do I connect my HP LaserJet printer to Wi-Fi?

Connect the printer with the Wireless Setup Wizard (printers with a touchscreen)

1. Place the printer near the Wi-Fi router.
2. Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard.
3. Select the name of your network, and then enter the password to complete the connection. Note:

How often do you have to replace the drum in a laser printer?

Separate drum units last quite a bit longer than a toner cartridge and typically should be replaced after the use of 3-4 toners. Your printer should inform you when it’s time to replace the drum, but you can usually tell your drum is on it’s last legs if you start to see black spots or lines across the page.

How do I setup my HP LaserJet P1102w wireless?

Go to Software and Driver Downloads, type your printer name, and then press Enter. Download the full feature software, and then follow the on-screen prompts to install and set up the printer on a wireless network. When prompted, restart your computer to finish the install.

How do I connect my HP LaserJet P1102w to network?

How do I connect my HP p1102w printer to WIFI?