How many square feet are in an acre-foot of water?

Acre to Square Foot Conversion Table

Acre [ac] Square Foot [ft^2]
1 ac 43560 ft^2
2 ac 87120 ft^2
3 ac 130680 ft^2
5 ac 217800 ft^2

What is 1 acre-foot of water?

An acre foot of water equals about 326,000 gallons, or enough water to cover an acre of land 1-foot deep. To put it another way, an acre foot of water is enough to flood a football field 1-foot deep (a football field is roughly an acre in size).

How do you calculate acre-feet of water?

Finally, to determine the “acre-feet” of your pond, multiply the surface area in acres by the average depth in feet. The result equals the volume of your pond in “acre-feet.” For example, if your pond is one surface acre with a 4-foot average depth, you would have 4 acre feet of water (1 x 4 = 4 “acre-feet”).

How many feet is a 1 acre pond?

approximately 208 feet x 208 feet
For a square pond, one acre is approximately 208 feet x 208 feet.

How do I calculate acreage in my pond?

Multiply the length times the width to get the square feet of surface area. This value can be converted to acres by dividing by 43,560 ft2/acre. So, a pond that measures 150 feet long and 100 feet wide would have an area = 150 feet X 100 feet = 15,000 ft2 or 0.34 acres.

What does 3 acre-feet of water rights mean?

This is the length of the irrigation season. The other restriction is that no more than three acre-feet of water (977,550 gallons) may be applied to each acre for irrigation purposes during the irrigation season. (Note that the amount of water delivered to a landowner is usually less than the amount of the water right.

How many acres is an acre-foot of water?

The amount of water required to cover one acre to a depth of one foot. This is equivalent to 43,560 cubic feet or 325,851 gallons. acres have more than one water source.

What does 4 acre-feet of water mean?

Acre-foot definition The volume of water, 43,560 cubic feet, that will cover an area of one acre to a depth of one foot. noun.

How do you calculate water area?

How do I calculate volume of water in a pond?

Use our handy calculator to work out your pond capacity.

  1. The easiest way to do this is to measure the length, the width and the depth of your pond in feet.
  2. Once you have all three dimensions, you need to multiply these all together and then multiply this calculation by 6.25.
  3. Pond Water in Litres.

How do you fill a 1 acre pond with water?

For example, he says, a rate of 50 gallons per minute will support a pond around two acres in size, and it takes 27,000 gallons to add one inch of water to a one-acre pond. It’s also important to consider the chemistry of the well water.

How many gallons of water does it take to cover 1 acre?

326,000 gallons
One acre-foot equals about 326,000 gallons, or enough water to cover an acre of land, about the size of a football field, one foot deep. An average California household uses between one-half and one acre-foot of water per year for indoor and outdoor use.

How do you measure a pond in acres?

How long does it take for a 1 acre pond to fill up?

If you’re filling your pond using a household water tap, you’re probably looking at a max flow rate of 2.2gpm, which is about 132 gallons per hour. At this rate, running 24 hours per day, it would take 17 months to fill your pond, not allowing for evaporation, storm events, or other factors.

How many gallons of water are in 1 inch of rain per acre?

27,154 gallons
One inch of rain falling on 1 acre of ground is equal to about 27,154 gallons and weighs about 113 tons. An inch of snow falling evenly on 1 acre of ground is equivalent to about 2,715 gallons of water.

How do I calculate the volume of water in my pool?

Length x width x depth x 7.5 = volume (in gallons) Length times width gives the surface area of the pool. Multiplying that by the depth gives the volume in cubic feet. Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool, expressed in gallons.

How do you calculate water in a farm pond?

Now, using the figures you have found, you can calculate the volume of water in the pond by multiplying the surface in square metres (m2) by the average water depth in metres (m) to get the volume of the pond in cubic metres (m3). Note: 1 cubic metre (m3) = 1000 litres (l).