What size is the axle nut on a Ford Explorer?
Before elevating the truck, you need to loosen the hub nut so you can remove it with your fingers (32 mm on 1995 and 30 mm on 2004) and the lug nuts (19 mm).
What size is the rear hub nut?
Yes, it is 36mm, but you can also use a 1 7/16 wrench. Bought a spare set of hubs, and used a 1 7/16 wrench to take the nut off. Rears are the same size as the fronts.
What size socket fits the axle nut?
The 5 most common axle nut sizes for Ford, Dodge, Toyota and GM vehicles!…Description.
| Item No. | Description | Weight |
|---|---|---|
| 30410 | 3.25″ 8 pt. Axle Nut Socket | 2.7 lbs (1.2 kg) |
| 30411 | 3.5″ 6 pt. Axle Nut Socket | 2.95 lbs (1.3 kg) |
| 30412 | 3.75″ 8 pt. Axle Nut Socket | 3.15 lbs (1.4 kg) |
| 30413 | 4″ 6 pt. Axle Nut Socket | 3.35 lbs (1.5 kg) |
What size is the rear axle nut on a 05 Ford Explorer?
3/4-16 Inch
Dorman AutoGrade 3/4-16 Inch Thread Axle/Spindle Nut.
What size is the rear axle nut on a 2006 Ford Explorer?
The rear axle nut size for a 2006 Ford Explorer is 22 mm. The axle nut is what holds the hub to the axle. It is the hub on the disc behind the wheel that the wheel bolts onto. It is recommended that if You have to remove an axle nut, You should discard it and replace it with a brand-new one.
What size is the axle nut on a 2001 Ford Focus?
M20-1.50 Thread Spindle Nut.
What size is the rear hub nut on a 2005 Ford Focus?
The correct size is 29mm.
What size is a spindle nut socket?
This is an Omix-ADA Spindle Nut Socket tool. It’s made for a 1/2″ drive tool. This is the socket you need to remove the large nuts on the spindle. The size is 2 1/16″.
What size is the spindle nut?
-16 Hex Size 1-1/16 In.
What size is the axle nut on a 05 Ford Taurus?
Front axle nut is 30mm.
What size is the axle nut on a 2004 Ford Focus?
What size is the spindle?
Spindle size: The majority of crank spindles come in either a 24mm or 30mm diameter. Below are some of the most popular brands and sizes.
How tight should spindle nuts be?
Expert Reply: The nut on the spindle should be tightened until snug, with no side-to-side play in the hub and then backed off slightly, about maybe a 1/8 of a turn.
What size is the axle nut on a 2002 Ford Taurus?