Where are fuses on Peugeot Partner?

In this model, there are 2 main places with the location of the fuse boxes : on the left under the dashboard (under the cover) in the engine compartment (near the battery under the protective cover).

Where is the fuse box in Peugeot Partner Tepee?

Fuse box location The fuse boxes are placed: – in the lower part of the fascia on the left-hand side, behind the cover (on the right-hand side in the RHD); – under the bonnet (near the battery).

How do you open the fuse box on a 2008 Peugeot?

The extraction tweezers are located behind the fusebox cover. Unclip the cover by pulling at the top left, then right. Remove the cover completely….Take the tweezers from their housing.

  1. Open the glove box.
  2. Press on the central handle of the fusebox cover.
  3. Lower the cover completely.
  4. Take the tweezers from their housing.

Where is the fuse box Peugeot 2008?

The fusebox 1 is located in the lower dashboard (left-hand side). Unclip the cover by pulling at the top right, then left, disengage the cover completely and turn it over. The fusebox 2 is located behind the glove box. The fusebox 1 is located in the glove box.

Where is the fuse box Peugeot 208?

In Peugeot 208 cabin fuses are located under the dashboard, above drivers footwell. OBD2 diagnostic port is next to the steering column. You need to remove dashboard cover to access fusebox and OBD2 diagnostic port.

Where is fuse box on Peugeot 308?

The fusebox is placed in the lower dashboard, left-hand side, inside the glove box. refer to the paragraph “Access to the tools”. The fusebox is placed in the engine compartment near the battery (left-hand side). Unclip the cover.

What does the spanner light mean on a Peugeot 2008?

The “”˜SERVICE’ light does not indicate the car needs a service, the light means there is a fault. It’s french, they come on from time to time if it doesn’t come on again just ignore it. When it’s due a device a spanner appears when you start the car, for a few seconds and when it’s nearly due it stays on permanently.

Where is the fuse box on a Peugeot 3008?

The fusebox is placed in the engine compartment near the battery.

What does the orange triangle mean on a Peugeot Partner?

Orange triangle warning light encircled by an arrow on Peugeot Partner: When the orange triangle is surrounded an arrow counterclockwise, this reason indicates the ESP light otherwise named DSC or DTC . This is driving assistance which gives you the opportunity to avoid road exits, for example when turning …

What is the TYRE pressure for a Peugeot Partner?

33 PSI / 2.3 BAR
Peugeot Partner 2008 Tyre Pressure

Front Tyre Size Front Tyre Pressure Rear Tyre Pressure
175/65/R14 T 90 33 PSI / 2.3 BAR 33 PSI / 2.3 BAR

Where is Peugeot 308 fuse box?

How do you change a fuse in a Peugeot 3008?

Replace a Fuse: 2008-2016 Peugeot 3008 HDi Sport 1.6L 4 Cyl. Turbo Diesel

  1. Remove Cover – Locate engine fuse box and remove cover.
  2. Locate Bad Fuse – Find the fuse that is tied to the bad component.
  3. Remove Fuse – Take out the fuse in question and assess if blown.
  4. Replace Cover – Secure the cover and test component.

Where is the cigarette lighter fuse on a Peugeot Partner?

Cigar lighter (power outlet) fuse in the Peugeot Partner is the fuse #9 in the Instrument panel fuse box. – under the bonnet (near the battery). If fitted on your vehicle, an additional fusebox is used for towing, the towbar and the connections for the coachbuilder and platform cab modifications.

Where is the fuse box on a towbar?

If fitted on your vehicle, an additional fusebox is used for towing, the towbar and the connections for the coachbuilder and platform cab modifications. It is located on the right behind the load retaining partition. How to check the fuses? How to replace a blown fuse?

Where is the fuse box on a Toyota Corolla?

– under the bonnet (near the battery). If fitted on your vehicle, an additional fusebox is used for towing, the towbar and the connections for the coachbuilder and platform cab modifications. It is located on the right behind the load retaining partition.